| 王子靖.复合矿物纤维在涂布白纸板芯层加填的应用实践[J].中国造纸,2019,38(9):79-81 |
二维码（扫一下试试看！） |
| 复合矿物纤维在涂布白纸板芯层加填的应用实践 |
| Application Practice of Using Composite Mineral Fiber as Filler in Core Layer of Coated White Board |
| 收稿日期：2019-05-01 |
| DOI：10.11980/j.issn.0254-508X.2019.09.013 |
| 关键词: 涂布白纸板 复合矿物纤维 非植物纤维 加填 |
| Key Words:coated white board composite mineral fibers non-plant fibers filling |
| 基金项目: |
|
| 摘要点击次数: 7443 |
| 全文下载次数: 3951 |
| 摘要:在涂布白纸板芯层生产中添加复合矿物纤维，当复合矿物纤维加填量为5%时，可使网下白水浓度降低14.7%，芯层上浆阀门开度、浆料流量均下降，节省了浆料用量；纸板内结合强度提高37.4 J/m2，横向挺度降低15.7%，纵向挺度降低16.9%。在客户对纸板指标可接受的条件下，使用复合矿物纤维适度加填，涂布白纸板生产成本每吨纸板降低45~60元。 |
| Abstract:Composite mineral fibers were used as filler adding in the core layer of coated white board. When the dosage of composite mineral fibers was 5%, the concentration of white water under the forming wire decreased by 14.7%, the opening of stock valve and stock flow of the core layer decreased, and the pulp consumption was saved. The internal bonding strength of the board increased by 37.4 J/m2, the CD stiffness and the MD stiffness decreased by 15.7% and 16.9% respectively . Under the acceptable condition of paper property, the production cost of coated white board could be reduced by RMB 45~60 per ton by using composite mineral fibers as filler. |
| 查看全文
HTML
查看/发表评论 下载PDF阅读器 |